Xiaomi Router AX9000 ROM Update

Xiaomi Router AX9000

Stable firmware for Xiaomi Router AX9000 (codename RA70) is downloaded for free from the official Xiaomi website — miwifi.com. We don’t make any changes to the original links, and we don’t keep the flash files and updates. This is stock ROMs.

You can download the latest version 3.0.40 and new updates for the Wi-Fi router below.

Global 3.0.40

Latest version of the stable Global firmware for Xiaomi Router AX9000 by Xiaomi.

3.0.40 ROM

Release date
2021-12-02
File size
41.42 MB
Official Link
Download (.bin)
Changelog
Expand list

China 1.0.168

Latest version of the stable Chinese firmware for Xiaomi Router AX9000 by Xiaomi.

1.0.168 ROM

Release date
2023-02-07
File size
44.70 MB
Official Link
Download (.bin)
Changelog
Expand list

Read the reviews on the 4PDA or XDA Developers websites before installing new software updates. If you downloaded the flash file or latest update, installed and encountered operation problems, please write about it in the comment section.

MIUI ROM
Add a comment

Subscribe to our Telegram where we post when new firmware and updates are released.
  1. Francisco Silva

    Does anyone know about ROM 3.0.48 (global version)for Xiaomi ax9000? I watched a video review by a Brazilian guy from Youtube where that ROM appears.

    Reply
    1. Yaroslav

      No information on that

      Reply
  2. Mckoy

    Hey patrick I have the same problem. Have you resolved yours? I need help too. We are in the same country by the way.

    Reply
  3. GAN

    Just bought an ax9000 router. The signal was very bad. My 3rd bedroom has no signal or only 1 bar. Last time i used ax3600. I have atleast 3 bar of signal inside my 3rd bedroom. Need advise urgenty from anyone on how to increase or improve the signal in ax9000 (Global rom). Thank you.

    Reply
    1. raf

      about 2 months ago got same router global version – have very low emission wifi and I decided to get access to ssh and change on setting wifi. and now is really nice. on this link you have you can find full instruction step by step what you need to do just need to translate to English but is worth good luck.

      Reply
      1. Diego

        Hola, puedes compartir el enlace.

        Reply
      2. Juan

        Hey,

        That sounds great, could you please share the link ?

        Reply
  4. NadCicho

    PLEASE! NEW VERSION firmware for EU (PL). this Global 3.0.40 is from 2021.

    Reply
  5. Mike

    For anyone looking to update the firmware, you’re better off using OpenWrt. You can find out more information on the main router page from OpenWrt website: https://openwrt.org/toh/xiaomi/ax9000

    Also, the forum has plenty of instructions available: https://forum.openwrt.org/t/openwrt-support-for-xiaomi-ax9000/98908/1443

    I stopped waiting for an update from Xiaomi so I am using OpenWrt instead and it’s working really well, the only drawbacks being OpenWrt is a SNAPSHOT version and radio3 requires a different BDF file to work, which can be replaced manually.

    You also don’t need to solder the cables on the UART interface to be able to use it.

    Reply
  6. spgkountis

    After the latest firmware upgrade to Chinese firmware for Xiaomi Router AX9000, 1.0.168 ROM, I noticed serious problems of DISCONECTIONS to the MESH network.
    Mesh (AX9000 main, AX6000 nodes, AX3600 nodes).

    Can I downgrade manually the main AX9000???????
    (previous version 1.0.165, was perfect, no disconnects at all.)

    Reply
    1. Yaroslav

      You need to find a manual about full flashing ROM. Simple downgrade is not avaliable.

      Reply
      1. spgkountis

        Never heard of such manual.
        Never seen it too. Cant find it either.

        Reply
        1. Yaroslav

          Yes. I couldn’t find it too… Then you can go to the service and tell them, that you want to do downgrade.

          Reply
  7. Alex

    The equipment seems to be great, but it really sucks in terms of functions. No updates for 2 years, really? It looks as if the equipment has been manufactured and already abandoned by the manufacturer. It is a pity that openwrt on the global version does not work, because it would still save the situation. Even wifi for guests cannot be created, not to mention firewall functions offered by other manufacturers in much cheaper solutions)
    I still have time to return to the store and I admit that I’m thinking about it because in this case I was disappointed with the equipment. Looking at the update for Europe, the announcement somewhere on the forum that the next update will change the work of wifi6 to 6e does not convince me. Powerful hardware but lack of proper software kills it. For a layman, it is enough, and on the other hand, a layman will not spend so much money.

    Reply
    1. ChoHenz

      there is a guest wifi with the phone app, never tested it though. is Europe version same with global?

      Reply
    2. Mike

      OpenWrt does run on the device and you have the option to create any sort of wireless networks you like. The only drawback is you need a USB Serial adapter and some wires to connect to the UART interface in order to have access to the bootloader interface. You will need to enable SSH access and disable secure boot through SSH first. Just follow the instructions in the forum here: forum.openwrt.org/t/openwrt-support-for-xiaomi-ax9000/98908/1443

      You will need to replace the BDF file for the radio3 antenna though and that is the only antenna which supports 160MHz Wi-Fi.

      Reply
  8. ChoHenz

    Can anybody share their experience with this. I am using AX9000 eu global. I know as per paper says that fan is automatically controlled but mine never run ever since. The router gets hot during days and I know the fan isn’t running since I have open the case just to observe. what is the exact conditions for the fan to run? Been using the router with only 5 devices connected wirelessly.

    Reply
    1. Yaroslav

      Have you got overheating of the device?

      Reply
      1. ChoHenz

        I dont think i was able to overheat the device. I just prefer it running cool and not warm. found some tips for this in forums, disconnecting one pin on fan. it runs but at max speed regardless of temperature

        Reply
  9. Patrick

    I am looking for person that is willing to swap their Chinese Rom to my Global Rom. i need china rom to make work with my existing ax1800 china rom. cannot mesh ax9000 global rom to ax1800 chn rom. email me if you are interested swapping. pref. philippines. thank you

    Reply
  10. emil r

    romanian linguage?

    Reply
    1. Yaroslav

      No

      Reply
  11. Kobi

    Hi
    Is there anyway to make my AX9000 Global rom mesh with AX1800 and AX6 Chinese ROM?

    Reply
    1. Yaroslav

      There is no such possibility.

      Reply
  12. Kobi

    Hi
    I have the AX9000 global. I want to make it as the main router and connect AX1800 and AX6 (chinese version) as MESH but it doesn’t work, they are not recognized . However, the AX6 can add the AX9000 as mesh but the whole point is to make the AX9000 the main router for “power”
    Can I update the AX9000 to Chinese ROM to make it work? will it work? or the AX9000 has MESH issues?

    Reply
    1. Yaroslav

      You can, if you will tune it properly with chinese interface.

      Reply
  13. Carlos

    Muy descontento, no se ajusta a las expectativas creadas por la gran publicidad y videos.
    No se entiende que no haya actualizaciones de Firmware desde 2021 en EU.
    Si, aceptan la devolución, se lo agradecería.

    Saludos, Carlos.

    Reply
    1. Yaroslav

      We’re not Xiaomi.

      Reply
    2. Yaroslav

      Entiendo su descontento, pero no somos representantes de XIaomi.

      Reply
  14. Scars

    Anyone here experiencing disconnection from wifi or lan using ax9000? I’m having that issue frequently when I bought this router.

    I hope there’s someone who can have a fix for that issue.

    Reply
  15. Fla76

    hello, I have the European version of the router…unfortunately in the Italian server I don’t see all the smart bulbs, bluetooth gateways and other things that I would see on the Chinese server…but the ax9000 EU router cannot be set to China (on Singapore yes, but I still don’t see all smart products with the Mi Home)…..

    in your opinion can I flash the Chinese Rom over EU rom?… is it possibly a reversible process if I wanted to go back to the EU version?

    Thanks
    Flavio -italy-

    Reply
    1. Yaroslav

      In theory it’s possible. But there is no guarantee, that all features of the router would be work fine.

      Reply
  16. Henrik Nyberg

    Honestly 1.5 years without an update on the EU version. It’s a disaster and my last Xiaomi router. Since it was an openwrt product I expected frequent updates. Shame on you Xiaomi, you should have more resources.

    Reply
    1. Yaroslav

      We’re not Xiaomi. But we understand your anger.

      Reply
  17. ice

    why theres no 2022 update to this beast router. you call it a gaming router but lacks about gaming features. asus is far more superior in terms of gaming features on their routers. No antivirus also.

    Reply
    1. Yaroslav

      ASUS has more functionality, but the price of that ASUS is higher. As for update, we don’t know, why there’s no updates. This question you need to delegate to the Xiaomi’s developers.

      Reply
  18. Kash

    does the global rom work on the chinese routers? would that allow for settings to be in english?

    Reply
    1. Yaroslav

      Here you need to check yourself by trial and error, because everything is individual. Such firmware will work on one router, but not on the other.

      Reply
  19. Ralf

    6 months no firmware update for the global version is not good and not user-friendly.

    Reply
  20. Filip

    We need big firmware update in Europe. Options are very poor but router specification is great

    Reply
  21. Dick Ravestein

    1_ Why can’t i upgrade the Chinese version firmware of the AX9000 router to global version firmware?
    2_ Why is there no English version firmware available for (Chinese) AX9000 router?

    Reply
    1. Yaroslav

      1. You can’t do this, because Roms are different.
      2. Because it’s chinese version of the router.

      Reply
  22. Kaziu

    Witam..czy przejdzie instalacja Global na wersje CN ?? ax9000 ??? w sumie wszystkie routery leca z CN.. wiec wydaje sie ze nie powinno byc problemu??

    Reply
    1. Yaroslav

      Instalacja globalnej wersji na routerze dla Chin nie zadziała. Xiaomi zadbało o to, aby takie działanie było niemożliwe.

      Reply
  23. Luis

    How to change the region on router, to set singapure region?

    Reply
    1. Yaroslav

      May be you need to flash the ROM with Singapure region. But the question is, if all the functions will be work correctly in this case.

      Reply
  24. Luis

    Hello..
    Mi AX9000 router is region CN, but all devices configured on mi APP Xiaomi Home, are on Singapure Region.

    Can’t add the router to APP because, is not same region..

    Pls help me.

    Reply
  25. Dick Ravestein

    Is this ROM in English or Chinese. I have bought a AX9000 Router but the settings are al in chinese. Is there an English rom?

    Reply
    1. Yaroslav

      This device have only Chinese ROM. The Global version is not prepared yet, because the router is a new product.

      Reply